Home / Products / Commercial Products / Sectional Doors / SteelForm™ / SteelForm™ S-20 and S-24
Sectional Ribbed Doors
These benchmark sectional ribbed doors provide proven Raynor reliability and durability to meet, or exceed, the requirements of daily use. The Raynor SteelForm S-20 and S-24, 20 and 24-Gauge doors are offered with the widest selection of quality features and options for the most common commercial door product applications.
Raynor SteelForm S-20 and S-24 sectional ribbed commercial doors are available with numerous features and options, including those listed below.
Constructed with stainless steel rivets and roll-formed tongue-in-groove meeting rails for maximum structural integrity, S-16, S-20, S-24, and S-24C doors are built to withstand heavy use.
Your SteelForm door comes packaged with the right combination of hardware, track, and springs to precisely match your door’s size and application and provides years of reliable service.
SteelForm doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Flexible, EPDM rubber flap header seal on S-16, S-20, S-24, and S-24C reduces air infiltration and energy costs by sealing the top of the door against the header.
Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.
SteelForm doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.
Doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26, 24 or 20-gauge) back covers.
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Select either 24″ x 8″ or fullview window sections. Choose from a variety of glass, insulated glass, acrylic and polycarbonate styles to suit any application.
Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.
Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
Allows you to channel fumes to the outside when the SteelForm S-16 door is closed. Available in a variety of sizes.
For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000; 50,000 or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Raynor SteelForm S-20 commercial sectional ribbed doors are available in White only.
Raynor’s ColorWave™ features Sherwin-Williams® next generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state of the art Raynor manufacturing to craft the perfect look for their home or project.
Section and Panel Schedules
Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
HARDWARE and SPRINGS
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
ColorWave™ Post Paint Process
Raynor warrants the ColorWave post paint process (exterior only) against chipping, cracking, and/or peeling (losing adhesion), for a period of (5) five years from the date of delivery to the original purchaser. Fading and chipping, cracking, or peeling caused by dents or scratches is not covered under this warranty.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.